Oxford HERITAGE Serie Manual De Instrucciones página 5

Included: • 1 Tailpack
• 1 Waterproof Liner
Fitting instructions:
Before fitting your Tailpack, always ensure that the surface onto which it is to be fitted is completely free from any
dirt. This is because even the finest of residue can lead to marking. It is designed to be attached onto a removable
rear seat/pillion seat of a motorcycle, not onto a seat hump/cover nor a rack. Roll closure at least 3 times and
secure with clip buckles.
To fit:
1. Unlock and lift seat of motorcycle (or pillion seat pad if motorcycle has one).
2. Fasten bag securely to seat using Hook and Loop strap provided. This Hook
and Loop strap must be fitted tightly. Replace seat and lock into place.
3. If the Hook and Loop strap is too long it can be cut down with a pair of
scissors. However, ensure a minimum 15cm overlap/contact patch is
still achieved.
4. Webbing straps have been included which are suitable for many motorcycles. However, you may need to
purchase bungees to suit your specific motorcycle to ensure a completely secure and stable attachment.
5. Attach the straps under tension to suitable, secure parts of the motorcycle frame, such as a dedicated luggage
hook or foot rest. Ensure that the front straps are tensioned towards the front of the motorcycle and the rear
straps are tensioned towards the back of the motorcycle, rolled at the ends and secured using hook and loop
tabs.
WARNING
• Do not overload – maximum recommended loading capacity 5 kg
• It is the owner's responsibility to ensure that the luggage is attached in such a way that it does not damage
or put at risk the owner or any property of the owner.
• Do not exceed the UK legal speed limit. This product has only been tested for use at UK road legal speeds.
• Regularly check cords/ straps for wear and replace if they show any signs of weakening or friction
damage. These can be purchased from your local dealer.
• When using bungee cords these should not be stretched beyond their elasticity (approx. 175% of their
original size).
• Ensure that no part of the straps or bag can damage your motorcycle and that it does not rub against
any moving or hot parts of the motorcycle such as the exhaust, thus causing it to fray, burn or otherwise
weaken.
PLEASE NOTE
• If the luggage is not attached securely, it may become detached
and cause an obstruction that could lead to serious injury and
even death.
• Tailpacks must NOT be attached to motorcycle seat humps. They
are only suitable for motorcycles with detachable seats (under
which the Hook and Loop strap should be locked into place). The
Hook and Loop strap (nor any other straps or bungees) must NOT
be fastened underneath the rear body work as it may come into
dangerous contact with the rear wheel.
• Integral Seatbelt
• 1 Pack of Webbing Straps
5
GB
TAILPACKS
Tailpacks must be attached
to the pillion seat using the
integral seat-belt strap &
additional straps
Heritage Luggage Guidelines