Airzone AZX6CCP Guía De Instalación Rápida página 18

When connecting the Webserver Cloud (AZX6WEBSCLOUD [C/R]), remove the fixing post from the Webserver and put the
connector in the external domotic bus 1.
ES
EN
FR
IT
Indoor domotic bus connectors
PT
The internal domotic bus allows you to interconnect the production control board to the
main control board or mains control board.
DE
It has a 2-pin terminal for the domotic bus connection. This system can only be connected
by bus. Attach the wires with the terminal screws following the color code.
Note: For a proper operation of the main control board, all the main control board must be addressed (up to 32 systems).
Aerothermal gateway bus connector
The AC unit bus allows you to connect multiple gateways of for air-to-water equipment installed. These are the elements that
can be connected:
- Airzone-Daikin Altherma aerothermal gateway (AZX6ACUACP [DAI/DA2]).
In order to connect these gateways, disconnect the terminal of the AC unit bus and fit in the connector and the fixing post of
the gateway.
Control relays
This device has 6 relays for controlling the installation. The characteristics of the control relays are I
(voltage-free. Note that to control elements with a greater power, it is recommended to use contactors in accordance with the
power required.
Important: Remember to connect the neutral connector directly from the circuit to the element to be controlled.
Depending on the type of installation, the control relays will follow a different logic:
16
of 10 A at 110/230 Vac
max