Time Schedule; Automatic Operating Mode Selection - Airzone AZX6CSMASTER Manual Del Usuario

TIME SCHEDULE

Supermaster controller allows you to simultaneously apply Mode schedules (

schedules ( ) to all the zones.
ES
You can define the imposition mode applied in each zone (forced, semi-forced or free).
Note: Time schedules report the range temperature.
EN
Time programming is independent for each control group. That allows different programming for each
FR
control group
IT

AUTOMATIC OPERATING MODE SELECTION

This mode executes previously created schedules. To use this operation mode, it is mandatory to fix the
PT
time of your Supermaster controller.
DE
Note: The automatic operation mode can be activated regardless of whether or not there is any active schedule.
To activate the automatic operation mode, press on the icon
automatic mode icon
on to confirm.
If you select mode schedule (
If you select temperature schedule (
alternate on the screen every 5 seconds. In this case, the operating mode can be change manually.
If you select both schedules (
the time alternate every 5 seconds.
If there is any active schedule, you will see this icon
or to finish .
In order to switch off schedules, just press on
24
or a common programming for all groups
, and use the arrows

), you will see this icon

), you will see this icon

), these icons
.
on the main screen. Then press on the
to select the schedule you want to activate and press
.
. The temperature and time values
will be displayed. The set-point temperature and
. It is also shown if the last order sent is to start
on the main screen.

) or Temperature