Tabla de contenido
Appearance & Interface Description
1. Air Hose Output
2. Hose Holder
3. Trigger
4. Nozzle Accessory Case
5. Battery Pack
6. LED Light
7. LCD Monitor
8. Jumpstart Cable Connector
9. Power/Setting Button
10. +/- Button
11. USB Charging Output
12. LED Power Switch
13. Battery LED Indicator
14. Charging Input Clamp
15. DC Charging Input
Operation Instructions
1. Setting the Maximum Pressure of the Air Inflator
• Short Press the Power/Setting Button until the LCD screen lights up
• Change the unit of measurement by short pressing the Power/Setting button
multiple times until you have the unit required displayed on the
screen(PSI, BAR, KPA, KG/CM).
• Set the maximum desired pressure by pressing and holding the Power/Setting
Button until the numbers on the screen flash. Press the +/- buttons to set the
desired pressure.
• Long press the Power/Setting Button to exit the setting
2. Inflating Using the Air Inflator
• Connect the hose or nozzle to the product to be inflated.
• Press the Trigger to start Inflation
• The air inflation will automatically stop once the maximum pressure
set is reached.
English
English
3
10
9
4
5
6
8
2
1
14
3
Tabla de contenido
