CHARACTERISTICS
Capacity: 1,5litros
Stainless steel blades
Speed selector
AUTO CLEAN button (Self Cleaning)
flanged base motor to wind the power cord
INSTRUCTIONS FOR USE
Install the jug (C) on the motor base (D) and then
gently rotate until it is properly screwed onto the
motor base.
Place the food inside the jar; the content must not
exceed the maximum level indicated on the jug.
Place the lid (B) on the jug (C) and make sure it is
properly installed.
Plug the power cord into an outlet and then press the
ON / OFF button to position '0'.
Once you have finished using the blender, wait a few
minutes until the engine stops operating, then remove
the jar.
To remove the cap, turn in the opposite direction to
that installed.
IMPORTANT NOTE
The maximum capacity of the jug is 1.5 liters. Do not exceed the
indicated capacity (when using liquids, not add more than 1.25
liters) - should not be placed too hot ingredients into the jug
(more than 80).
Remove the jar once the engine has completely stopped.
Do not use the functions for more than 3 minutes.
Allow the engine about 2 minutes and then to operate the
blender.