Tabla de contenido
Proper Usage
4. O
PERATION
This laser product is not designed for continual use. Make sure there are regular breaks during operation to
maximize the life of your laser. Always disconnect the JAM Pack™ Gold products from power when not in use.
Fog Machine
Wired Remote
UV Strobe
Control Panel
Operation
UV Strobe
Combo
Strobe Modes
JAM Pack™ Gold User Manual Rev. 3
This laser product is for overhead mounting only. For safety purposes, Chauvet recommends
mounting lighting effect products on steady elevated platforms or sturdy overhead supports
using suitable hanging clamps. In all cases, use safety cables. Obtain appropriate mounting
hardware from your lighting vendor.
International laser safety regulations require that laser products must be operated in the fashion
illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor and
the lowest laser light. Additionally, 3 meters of horizontal separation is required between laser
light and audience or other public spaces.
CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN
THIS USER MANUAL may result in hazardous radiation exposure.
Trigger the fogger using the included wired remote. The LED indicator on the remote indicates when the
fogger has reached the required operating temperature. Press the button on the remote to momentarily
output fog. The length of the wired remote cable is 13 ft (4 m).
Button
<UV ON/OFF>
Turns the UV blacklight on or off.
<STROBE MODE>
Controls the Strobe Mode.
·
Indicator LED will blink when Strobe Mode is on
·
Indicator LED will be static on when in Sound-Active Mode
Function
Very Fast (20–30 Hz)
Fast (10–20 Hz)
Strobe Modes
Medium (5–10 Hz)
Slow (1–5 Hz)
Very Slow (0.5–1 Hz)
Off
Sound-Active Mode
Static On
Function
Sub-Option
Blink
1 x Press
Blink
2 x Press
Blink
3 x Press
Blink
4 x Press
Blink
5 x Press
6 x Press
Static On
7 x Press
Static On
8 x Press
Static On
LED Status
Page 19 of 112
Tabla de contenido
