Connect With Pc - Nevir NVR-TAB101QHD S2 Manual De Usuario

picture, you may zoom in/zoom out/ skip to next picture/skip to
previous picture/ rotate/ delete the picture...
8. Camera
Click "Camera" in the main interface.
8.1 Camera
If the cursor is at
Click to take picture.
Click to set the scene mode, Picture size, Picture quality, and
colour effect.
Click
8.2 DV
If the cursor is at
Click to take picture.
Click to set the colour effect or restore to default settings.
9. Connect with external device

9.1. Connect with PC

Connect the device with the PC via the USB cable. The PC appears
two new disk symbols after connected successfully. One is the TF
card, and the other is the built-in flash.
9.2. Applications
For convenient usage, we installed some third party software in the
MID. For detailed operation methods, please check the corresponding
instruction. Some of the software may be able to be used in some area
because of network service.
position, the device is at Camera mode.
to set white balance.
position, the device is at DV mode.
15