Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
Operating instructions
ITL-1001
If no signal is transmitted within 12 seconds, the learning process is
automatically aborted.
16 different codes or transmitters can be taught in per channel.
The encoding remains saved even after a power cut.
Erasing individual codes
Proceed as described in points 4.) and 5.), however, press the OFF but-
ton instead of the ON button.
Erasing all codes
Hold down the learn button (L) for approx. 6 seconds until the LED
flashes quickly.
Briefly release the button and then press the learn button (L) again.
The delete process is confirmed by switching twice.
To view the declaration of conformity, please visit
www.intertechno.at/CE
Tabla de contenido
