Setup; Optional Accessories; Technical Specifications - LD Systems STINGER G3 Serie Manual De Usuario

SETUP

Thanks to the multifunctional cabinet, the subwoofers of the Stinger G3 Series can be placed both horizontally and vertically. Non-slip rubber
rails provide stability in both cases. To prevent slippage when stacking the subwoofers, recesses are located on the top for the rubber rails. An
M20 threaded flange when using a speaker extension tube is located on the top side of the cabinet.

OPTIONAL ACCESSORIES

LDESUB15G3: Protective Cover
Castor Board
LDESUB18G3: Protective Cover
Castor Board

TECHNICAL SPECIFICATIONS

Product number:
Product type:
Type:
Low/mid driver dimensions:
Low/mid driver dimensions (mm):
Woofer magnet:
Woofer brand:
Woofer voice coil:
Woofer voice coil (mm):
Load rating (RMS):
Peak power:
Frequency response:
SPL (1W/1m):
Max. SPL:
Impedance:
Loudspeaker inputs:
Speaker input connections:
Loudspeaker outputs:
Speaker output connections:
Cabinet material:
Cabinet surface:
Cabinet construction:
Width:
Height:
Depth:
6
Item No.: LDESUB15G3PC
Item No.: LDESUB15G3CB
Item No.: LDEB122G3PC
Item No.: LDESUB18G3CB
LDESUB15G3
PA subwoofer
passive
15"
381 mm
Ferrite
Custom-made
3"
76.5 mm
600 W
1200 W
40 Hz - crossover
99 dB
127 dB
8 Ohm
1
Speakon compatible
1
Speakon compatible
18 mm plywood
Polyurea
Vented
567 mm
477 mm
624 mm
LDESUB18G3
PA subwoofer
passive
18"
457.2 mm
Ferrite
Custom-made
4"
101.6 mm
800 W
1600 W
35 Hz - crossover
99 dB
129 dB
8 Ohm
1
Speakon compatible
1
Speakon compatible
18 mm Plywood
Polyurea
Vented
677 mm
547 mm
740 mm