Cleaning Cautions - Remington Smart Edge XF8500 Manual Del Usuario

ENGLISH
E Tips for best results
• Always hold the shaver at right angles to the skin so that all three foils are
touching the skin with equal pressure.
• Use moderate to slow stroking movements. The use of short linear motions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
, DO NOT press hard against the skin in order to avoid irritation and damage
to the foil heads.
, Note: your shaver has been designed to be used in the shower if
desired.
C CARE FOR YOUR SHAVER
• Care for your appliance to ensure a long lasting performance.
• We recommend you clean your product after each use.
• The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
• Keep the switch in the "off" position when not in use.

, CLEANING CAUTIONS

• Ensure the shaver is switched off and unplugged from the power source.
• Remove the foil assembly by pressing the release buttons on either side of
the head and lifting the foil assembly upwards to remove from the hair
pocket.
• Tap out the excess hair shavings and rinse the foils under running water.
• Do not clean the shaving foil with a brush.
• Replace the head assembly by placing the assembly on top of the hair
pocket, press down and click into place.
, CLEANING TRIMMER
• Lubricate the teeth of the trimmer every six months with a drop of sewing
machine oil.
, REPLACING THE FOILS & CUTTERS
• To ensure continued high quality performance from your shaver, we
recommend the foils and cutters are replaced every six months.
, Signs that your foils and cutters need replacing.
• Irritation: as foils get worn, you may experience excessive skin irritation.
• Pulling: as the cutters wear, your shave may not feel as close and you may
feel the cutter pulling your hair.
• Wear through: you may notice that the cutters have worn through the foils.
5