Rosewill RMS-TDM02 Guia De Instalacion página 16

RMS-TDM02 Desk Mount Installation Guide
Grommet Clamp (Optional)
C-Clamp Steer Plate Removal :
1.Take the base and remove the C-Clamp steer plate (C), by loosening the C-Clamp nut (A)
1
with open end wrench (not included).
2.Loosen the 4 (B) screws from the C-Clamp steer plate by using the Allen wrench .
8
3.Remove the C-Clamp Steer plate (C).
4.Keep C-Clamp nut (A) in the event you wish to revert back to the C-Clamp installation.
Note :
Keep the 4 (B) clamp screws as you will need them to mount the Grommet steer
plate to the base.
1
C
B
A
8
14