Trouble Shooting; Special Declaration; Short Cord Instruction - Rosewill RHIC-11001 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Induction Cooker with Stainless Steel Pot
7

Trouble Shooting

1. Power cord replacement If the power cord is damaged, please contact the relevant
after-sale service agent, who will dispatch personnel for the repair. For the purpose
of your safety, please never replace it by yourself.
2. Trouble shooting
Occurrence
No pan
Low voltage
Over voltage
Pan parched
IGBT over heat
NTC1 break off
NTC1 short circuit
NTC2 break off
NTC2 short circuit

Special Declaration

8
All the contents in the material have been subjected to careful check. For any mistake
and omissions in printing or misunderstanding of the contents, the company keeps
the right to interpretation
Addition: Any technical improvements shall be in the revised manual without notice;
for any changes in appearance and color, those of the actual product shall prevail.

Short cord instruction

9
1.A short power-supply cord should be used to reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
2.Extension cords are available and may be used if care is exercised in their use.
3.If a extension cord is used:
a) The marked electrical rating of the extension cord should be at least as great as
the electrical rating of the appliance
b) The cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
Code
E1
Every 2s one short sound
E2
Every 5s two long three short sound
E3
Every 5s two long four short sound
E6
Every 5s two long two short sound
E0
Every 5s four long three short sound
E7
Every 5s four long five short sound
E8
Every 5s four long four short sound
E9
Every 5s three long five short sound
EE
Every 5s three long four short sound
6
Sound
RHIC-11001
user manual
Note
After continuous 10s,
it sends out twice 5
sound report and then
turn to standby status
Until voltage recovery
Report twice then turn
to standby status
Until fault clearance
Tabla de contenido
loading

Tabla de contenido