Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Dust extraction
An adaptor is required to connect a vacuum cleaner or dust
extractor to the tool.
Insert the dust extraction adaptor into the saw dust outlet
(9).
Connect the vacuum cleaner hose to the adaptor.
Hints for optimum use
Always use the appropriate type of saw blade for the
workpiece material and type of cut.
Always hold the tool with both hands.
Let the blade run freely for a few seconds before starting
the cut.
Apply only a gentle pressure to the tool while performing
the cut.
Work with the shoe pressed against the workpiece.
As some splintering along the line of cut on the top side of
the workpiece cannot be avoided, cut on the side where
splintering is acceptable.
Where splintering is to be minimised, e.g. when cutting
laminates, clamp a piece of plywood onto the top of the
workpiece.
Support large panels to minimize the risk of blade pinching
and kickback. Large panels tend to sag under their own
weight.
Supports must be placed under the panel on both sides,
near the line of cut and near the edge of the panel being
cut.
Never hold piece being cut in your hands or across your
leg.
Secure the workpiece to a stable platform using clamps. It
is important to support the work properly to minimize body
exposure, blade binding, or loss of control.
Accessories
The performance of your tool depends on the accessory used.
Stanley Fat Max accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
remove the battery from the tool.
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
(Original instructions)
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be f tted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the f tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Z
Should you f nd one day that your Stanley Fat Max product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
z
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe off ce at
the address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Stanley Fat Max batteries can be recharged many
times. At the end of their useful life, discard batter-
Z
ies with due care for our environment:
Run the battery down completely, then remove it from the
tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
ENGLISH
9
Tabla de contenido
