Firstech, LLC. CompuSTAR 2W901R-SS Guia Del Usuario página 6

Quick Reference
STEP 1: Enter remote programming mode by holding the Trunk and Start/Stop buttons
"REMOTE MENU" to indicate that you have successfully entered programming mode.
STEP 2: After entering programming mode the time icon will flash indicating the current time. Adjust the time settings by tapping the Lock
change the hour and Unlock button to adjust the minute
STEP 3: Once the time has been set, exit remote programming by holding down the Trunk and Start/Stop
remote will beep indicating that you have successfully exited programming mode.
By Firstech, LLC 8
Quick Reference
for 2.5 seconds. The remote will beep and the LCD read
button to
buttons for 2.5 seconds. The
Button Duration LCD readout
half second LOCK ARM Locks doors and if equipped, arms the alarm.
4 seconds PANIC Panic/vehicle locater (flashes vehicle's parking lights and sounds siren and horn).
half second UNLOCK DISARM Unlocks doors and if equipped, disarms the alarm.
half second Turns on the CompuGLO backlight
double tap REMOTE VOLTAGE Tapping this button twice will show the remote's battery voltage.
2.5 seconds TRUNK OPEN Trunk release. Triggers the trunk release output and opens the vehicle's trunk.
TEMPERATURE/ Car Check (updates vehicle status on remote pager) / Secure Auxiliary /
half second
VEHICLE VOLTAGE Temperature Display / Vehicle Voltage Display
double tap EXTEND Run time extender. Resets the run time for Turbo Timer or Remote Start.
2.5 seconds REMOTE START Holding this button will start your vehicle. Repeat and this will shut your vehicle down.
This button activates and deactivates multiple features. See the Function Button Menu table below for complete details.
Function/Description
9 By Firstech, LLC