BTI BH 3-30 BOX Manual Del Usuario página 18

ENGLISH
HEAVYDUTY ROTARY HAMMERDRILL
BH 330 BOX
Congratulations!
You have chosen a BTI tool. Years of experience, thorough
product development and innovation make BTI one of the most
reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
No-load speed
No-load beats per minute
Power input
Single impact energy (EPTA 05/2009)
Maximum drilling range in steel/wood/concrete
Optimum drilling range in concrete
Tool holdler
Collar diameter
Weight
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
Drilling into metal
Vibration emission value a
h , D
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
18
BH 3-30 BOX
V
AC
V
AC
-1
min
bpm
W
J
mm
mm
mm
kg
dB(A)
dB(A)
dB(A)
= m/s²
m/s²
= m/s²
m/s²
= m/s²
m/s²
m/s²
m/s²
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
230
of work patterns.
230/115
EC-Declaration of Conformity
1
0-1150
Machinery Directive
0-5200
950
3.5
Heavy-Duty Rotary Hammerdrill
13/30/30
BH 3-30 BOX
12-28
BTI declares that these products described under Technical
SDS-Plus
Data are in compliance with:
54
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
3.7
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact BTI at the
following address or refer to the back of the manual.
93
The undersigned is responsible for compilation of the technical
104
file and makes this declaration on behalf of BTI.
3
6.9
Andreas Krebs
1.5
Managing Director
BTI Befestigungstechnik GmbH & Co.KG
Salzstraße 51
7.8
74653 Ingelfingen
1.5
01.04.2018
WARNING: To reduce the risk of injury, read the
≤ 2.5
instruction manual.
1.5
Definitions: Safety Guidelines
≤ 2.5 The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
1.5
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
ppa. Martin Mayer-Hagelstein
Director Marketing & E-Commerce