Trust START-LINE ACM-100 Manual Del Usuario página 4

INSTALLATION
The wire colours may differ in practice. If in doubt, contact
a professional installer. The receiver requires a continuous
230V mains supply in order to operate. When mounting in
a flush-fit wall enclosure, check to ensure the presence of a
(blue) neutral wire.
MAXIMUM LOAD
Do not connect bulbs or equipment that exceed the
receiver's maximum load in order to prevent faults, short-
circuit or fire.
RISK OF ELECTRIC SHOCK
Take great care when installing a receiver. A live voltage
may be present at the receiver even if it is switched off.
LIFE SUPPORT
Never use Trust SmartHome products for "life support"
systems or applications where equipment faults may lead
to life-threatening situations.
LEGAL INFORMATION
CE: Trust declares this device complies with the Directives as listed in Section 2 of this document.
WEEE: Dispose of the device at a recycling centre. More information: www.trustsmarthome.com
Warranty information: www.trustsmarthome.com/warranty
ACM-100 BUILD-IN MULTI DIMMER
INTERFERENCE
All wireless products may be adversely affected by
interference. Place receivers at least 50 cm away from
each other in order to prevent mutual interference.
REPAIRS
Do not attempt to repair or modify this product. If you
doubt correct operation, return the product to the shop
where you bought it.
WATER AND MOISTURE
This product is not water-resistant. Use a waterproof
mounting enclosure for outdoor applications. This product
may only be cleaned with a dry cloth.
ENVIRONMENT/USAGE
Do not expose the product to excessive heat or cold.
Extreme temperatures have an adverse effect on the
service life of electronics and batteries. Do not drop the
product. Impacts may damage the internal electronics.
EN
2