Control Panel; Pre-Programmed Functions - Crux Artisan Serie Manual De Instrucciones

CONTROL PANEL

1. DIGITAL DISPLAY. When the unit is plugged in, or if the
FUNCTION button is pressed, the backlighted screen will
indicate active FUNCTION, PREHEAT, toast SHADE (1 - 7),
cook TIME remaining, CONVECTION or TURBO Boost and
TEMP.
Note: If no buttons are pressed within 1 minute, the
backlighted digital display will turn OFF as the Toaster
Oven rests in standby mode.
2. FUNCTION Button. Press once to advance the arrow
to 10 pre-programmed cook cycles. An audible beep can
be heard and the active cycle will flash, the light above
the FUNCTION button will illuminate once the START
button is pressed.
3. START/CANCEL Button. Press to START the selected
function or CANCEL. The light above the button will
illuminate to indicate the unit is ON. When the
START/CANCEL button is pressed again, the unit
and light above the button will turn OFF.
4. CONVECTION/TURBO Button. When pressed "CONV." a fan
appears on the digital display to indicate the convection
fan is operating. Press the CONVECTION/TURBO button
again to activate TURBO Boost at any time. The light above
the button will illuminate. Press the CONVECTION/TURBO
button again to turn the fan OFF. TURBO mode is used for
air frying foods. The light above the button will remain off
if the fan is not selected or once the function is cancelled.
5. LIGHT button. When the light button is pressed, the internal
light illuminates. The light can be switched ON/OFF at any
point during the cooking process or when the TOV is not
functioning.
6. TIME Control Dial. Turn to manually change times from
01:00 minute minimum to 99:00 minutes maximum. When
using the DEHYDRATE function, times can be programmed
from 01:00 hour to 72:00 hours. An audible tone can be
heard as the TIME is changed.
NOTE: Functions are preprogrammed and can only
be changed within preset limits.
7. TEMP Control Dial. Turn to manually change temperature
from 150ºF minimum to 480ºF maximum. When using
the DEHYDRATE function, temperatures can be
programmed from 80ºF to 180ºF. An audible tone can
be heard as the TEMP is changed.
NOTE: Functions are preprogrammed and can only be
changed within preset limits

PRE-PROGRAMMED FUNCTIONS

1. TOAST: High heat sears and produces deliciously crisp results. Bread, muffins, frozen waffles,
frozen toaster pastries, prepared toaster foods, etc.
2. BAGEL: High heat sears the topsides of bagels, while warming the insides. The BAGEL function
is ideal for toasting English muffins or thick sliced specialty breads which require only the top side
to be toasted.
3. WARM: Maintains hot foods for up to 99:00 minutes at 170°F the recommended temperature
to prevent bacterial growth, and can be programmed from 150ºF to 200ºF.
9