LaserLiner SuperSquare-Laser Manual De Instrucciones página 5

Read the operating instructions and the enclosed brochu-
!
re „Guarantee and additional notices" completely.
Follow the instructions they contain. Safely keep these
documents for future reference.
90° Line Laser
The SuperSquare-Laser's two laser lines make it the ideal instru-
ment for all types of alignment work on the oor. The long-range
laser beams also project very visible laser lines on walls. The two
illuminated spirit levels can be used to obtain above- oor align-
ments on walls. The inboard, 90° try-square edge makes it easy
to align the rst oor tile. 635 nm laser, 0.05° accuracy of right
angle, integrated levelling feet, 1/4" tripod connection.
Includes: laser goggles, carrying case and batteries (2 x type AA).
General safety instructions
Caution:
Do not look directly into the
beam. Lasers must be kept
out of reach of children.
Never intentionally aim the device at people. This is a quality laser
measuring device and is 100% factory adjusted within the stated
tolerance. For reasons of product liability, we must also draw your
attention to the following: Regularly check the calibration before
use, after transport and after extended periods of storage. We
also wish to point out that absolute calibration is only possible in
a specialist workshop. Calibration by yourself is only approximate
and the accuracy of the calibration will depend on the care with
which you proceed.
This is a precision instrument product which must be
!
handled with care. Avoid impacts and jarring. Store and
transport the instrument in its case! All lasers off! Clean
with a soft cloth and glass cleaner.
1 Inserting batteries
Open the battery compartment
(7) and insert batteries according
to the symbols. Be sure to pay
attention to polarity.
SuperSquare-Laser
Do not stare into the
beam! Class 2 laser
EN 60825-1:2007-10
Laser radiation!
< 1 mw · 635 nm
GB
05