auna Ultrasonic BT Manual De Instrucciones página 24

EN
24
BT operation
1. Press the FUNCTION/
will display "bt" and the pair indicator will flash at high speed.
2. Turn on the BT function on the device, scan the unit "KP683" and
connect, then input the password 0000 if required, the pair indicator
keep light up to indicate connection done, and the display will show "bt".
Press Play to start playback.
Adjust the VOLUME on the unit or on the external device to increase or
decrease the music volume to your desired level.
3. Press and hold the PLAY/PAUSE/PAIR/SCAN button to disconnect BT
Note
BT works best within 10 meters in open air.
AUX IN mode
1. Press the FUNCTION/
2. Connect your audio device to the AUX IN jack on the top panel of the unit
with an AUX IN cable (audio cable is not included).
3. Adjust the VOLUME on the unit or on the external device to increase or
decrease the music volume to your desired level.
4. Control the playback with your audio device.
Mic jack operation
Microphone input is available in all modes.
1. Connect your microphone to the two 6.3mm MIC JACK on the unit.
2. Rotate the MIC VOL. knob on the unit to increase or decrease the
microphone volume.
3. Press and hold the P-MODE/M./ECHO button to turn on or turn off the
microphone echo effect.
button on unit to switch to BT function, the LCD
button on unit to select the "AUX" mode.