Cleaning Intervals
IMPORTANT!
Regular cleaning and disinfection enhances
smooth operation, increases the service life and
prevents contamination.
Clean and disinfect the product
-
regularly while it is in use,
-
before and after any service procedure,
-
when it has been in contact with any body
fluids,
-
before using it for a new user.
Cleaning Instructions
IMPORTANT!
-
Clean by hand
-
Maximum cleaning temperature 60 °C
1.
Clean the product by wiping down all generally
accessible surfaces.
2.
Dry the parts with a cloth.
Disinfection Instructions
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
Lubrication
To make raising or lowering the seat/lid easier, you may
lubricate the commode back frame rail with a very small
amount of petroleum jelly or furniture polish.
12 Reconditioning
This product is suitable for reuse. To recondition the
product for a new user, carry out the following actions:
•
Inspection
•
Cleaning and disinfection
For detailed information, see 11 Maintenance, page 4 .
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse
the product.
13 Disposal
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the
different materials can be separated and recycled
individually.
The disposal and recycling of used products and
packaging must comply with the laws and regulations
for waste handling in each country. Contact your local
waste management company for information.
14 Technical Data
Dimensions
Seat height range
Seat depth
Width between armrests
DL3010064-A
15"-21"(38-53 cm)
15"(38 cm)
19" (48 cm)
Overall width
Adjustment steps for seat
height
Weights
Weight
Maximum user weight
Materials
Tubes / frame / pin
Seat / pan
Armrest pad
Plug / Plastic rings on
tubes
Foot
Snap button
NOTE: Feet on this product contain dry natural rubber.
15 Environmental Parameters
Operating Conditions
Ambient temperature
Relative humidity
Storage and Shipping Conditions
Ambient temperature
Relative humidity
24" (61 cm)
1" (2.54 cm)
4.56 kg
350-lb. (159 kg)
Steel
PP
PE-HD
PP
TPU
65Mn
10 - 40 °C
15% - 93%,
non-condensing
0 - 40 °C
30% - 75%,
non-condensing
5