Section 1 - Introduction; Use Of The Calibration Test Unit (Ctu) Operator's Manual; System Description; Symbols And Standards - Bard Arctic Sun 5000 Manual De Instrucciones

TEMPERATURE MANAGEMENT SYSTEM

Section 1 - Introduction

1.1 Use of the Calibration Test Unit (CTU)
Operator's Manual
The Calibration Test Unit provides an effective and easy way of checking
and calibrating, if necessary, the A
System Model 5000. This Manual provides a detailed description of
the CTU, its use, construction, routine maintenance and calibration.
It is important that the CTU be properly maintained and serviced in
accordance with the instructions described in this manual. Only trained
personnel should use and service this product.
The CTU is intended to be used in association with the A
Temperature Management System Model 5000 Service Manual.
The Service Manual provides detailed information about the
A S Temperature Management System and how the
®
rctic un
CTU can be used to troubleshoot problems in addition to its
normal test and calibration functions.

1.2 System Description

The CTU is, for the most part, a passive device that provides stimulus
and feedback to the A S
®
rctic un
to enable it to test and calibrate itself. The sole active function of the
CTU is to provide an external heat source to raise the circulating water
temperature for troubleshooting under the guidance of Medivance
technical support personnel.
S Temperature Management
®
rctic un
S
rctic un
Temperature Management System

1.3 Symbols and Standards

The CTU bears the following symbols affixed to the system:
Table 1.1. CTU Symbols
®
50°C
-30°C
95
05
4
C T U M A N U A L
For the safe and effective use of this device,
the operator must consult the accompanying
documents prior to use.
Models of the A S Temperature
®
rctic un
Management System CTU that bear the ETL
Monogram have been Certified for Safety by
ETL Intertek in accordance with standards
C22.2, No. 61010-1, and UL 61010-1.
Indicates high temperature part or component.
The maximum temperature of this internal
component allowed by the protective system
is also listed.
Indicates electrical hazard.
Indicates Earth Ground.
Identifies the heater fuse.
Identifies the storage temperature range.
Identifies the storage relative humidity range.
Indicates the date of manufacture.
Denotes calibration data.
Denotes a push-button, momentary switch.
Manufacturer
Catalog number
Identifies European Representative.
The CTU must be disposed of properly.
DO NOT dispose of the unit into the garbage.