Russell Hobbs Steam TIP 15129-56 Instrucciones página 3

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
diagrams
1 temperature control
5 mark
S steam available
2 light
3 water inlet cover
11 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
U BEFORE USING FOR THE FIRST TIME
1 Remove any labels, stickers or packaging from the iron and soleplate.
2 Don't worry if the iron smokes a bit at first, it'll stop as the element cures.
3 Iron an old piece of cotton fabric, to clean the soleplate.
4 Press the S and * buttons 3 or 4 times, to check them.
C PREPARATION
5 Check for textile care symbols (i j k l).
6 Iron fabrics needing low temperatures j first, then those that need medium temperatures
k, and finish with those needing high temperatures l.
X FILLING
7 The iron may be used with tap-water, but if you live in a hard-water area, you should use
distilled water (not chemically descaled water).
8 If you buy distilled water, check that it is marketed as suitable for irons.
9 Don't add anything to the water – you'll damage the iron.
10 Unplug the appliance.
11 Set the temperature control to •. Set the steam control to S.
12 Open the water inlet cover.
13 Tilt the iron till the water inlet cover is vertical.
14 Pour water from the jug into the water inlet.
15 Pour slowly, to allow the air in the reservoir to escape, and avoid an airlock.
16 Don't fill past the max mark on the reservoir, or water will escape in use.
17 Close the water inlet cover. Wipe up any spillage.
C SWITCH ON
18 Set the temperature control to •. Set the steam control to S.
19 Sit the iron on its heel.
20 Put the plug into the power socket.
21 Turn the temperature control to bring the setting you want (see the guide below) next to the
5 mark. The light will glow.
22 When the iron reaches the set temperature, the light will go off. It will then cycle on and off as
the thermostat operates to maintain the temperature.
temperature setting guide
label marking
j
cool – nylon, acrylics, polyester
k
warm – wool, polyester mixtures
l
hot – cotton, linen
i do not iron
, If the instructions on the fabric label differ from this guide, follow the instructions on the
label.
4 water inlet
5 spray nozzle
6 soleplate
7 steam control
) mark
# high steam
household use only
3
S no steam
8 steam vents
9 reservoir
10 heel
temperature setting
••
•••/max
Tabla de contenido
loading

Este manual también es adecuado para:

17877-56

Tabla de contenido