Unit Connectors; Led Indicators - Axis T8412 Manual Del Usuario

Page 6

Unit connectors

LAN/PoE OUT - RJ-45 Ethernet connector. Provides power to network cameras that are PoE
enabled.
LAN/PSE IN - The Power bank provides 48 V DC power (External power bank not included).
USB slot - Connect USB storage devices for data storage.
Micro SD slot - Insert a Micro SD card into the slot for data storage.
AV in - BNC connector for connecting an analog camera. Use a 75 ohm coaxial video cable.
CAT5 Cable tester - for testing and detecting wiring types. See Network cable test, on page 12 for
instructions on testing wiring type.
Power Adapter - 12 V DC connector.

LED indicators

LED Indication
Power Power on indicator.
Data Flashes when the AXIS T8412 is under operation
Charging The LED will stay lit while the AXIS T8412's battery is charging.
Battery
The AXIS T8412 is powered by a rechargeable Li-ion battery pack that takes approximately 4 hours
to charge, and provides the AXIS T8412 with up to 3 hours run time.
To open the battery compartment cover, press it while sliding it
outward, as shown in the figure below.
When installing the battery, make sure that it is oriented correctly
as shown in the figure.
During the charging process, the charging indicator will be lit.
AXIS T8412 User's Guide