Network Cable Test - Axis T8412 Manual Del Usuario

Page 12
AV In
Test analog video by connecting the BNC cable from the camera's video output to the AXIS T8412
video input port. Tap the AV In icon in the Main Menu, and the video signal will be displayed on the
LCD screen. Press the ESC key to return to the menu.
To adjust the contrast in the image, go to Setup > Setup AV.

Network cable test

Follow these steps to test a network cable for
type; straight or cross, and for errors; open,
short or miswire.
1. Connect one end of the network cable to
the supplied CAT5 Network terminator and
the other end to the CAT5 port.
2. Tap the CAT5 icon in the Main menu
3. The cable's wire map will be displayed on
the screen.
AXIS T8412 User's Guide
Video in