Care And Maintenance - Allen + Roth 1173411898 Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
1. Insert 7x50 screws (CC) into the front panel (B),
connect them to the side frames (C and D) and tighten.
Insert one 7x90 screw (AA) to each side frame (C and D)
and connect to the crossbar (F) and tighten.
Hardware Used
AA 7 x 90 Screw x 2
CC 7 x 50 Screw x 4
2. Place top frame on top of assembled body and use
four 7x25 screws (BB) to connect to side frames
(C and D).
Hardware Used
BB
7 x 25 Screw x 4
3. Place eight 6x34 bolts into allotted holes on the side
frames (C and D), then slide in support frames (E) on
top of bolts.
Hardware Used
DD x 8
6 x 34 Bolt
1
B
CC
CC
CC
C
AA
F
AA
2 A
BB
3
DD
DD
DD
E
Lowes.com/allenandroth
4

CARE AND MAINTENANCE

• Storage during winter: Wood can shrink and expand depending on the humidity. This furniture has
been manufactured and designed for a summer climate. Do not store this product in centrally heated
rooms, as this will cause the timber to dry out and possibly shrink and crack. Cool, well-ventilated
sheds are the most suitable location.
• After the wood has been in use for a period of time or has dried out, it may be necessary to tighten
(with only moderate torque) the screws. Use a hexagonal wrench.
WARRANTY
This outdoor furniture is warranted by the manufacturer to the original purchaser for a period of one
(1) year from the date of purchase against defects in workmanship and materials only. If your outdoor
D
furniture fails structurally during normal use within one (1) year of purchase, the manufacturer will
repair or replace the defective piece at its discretion (with the same or similar product if original
product is discontinued) at no charge.
Printed in Vietnam
allen + roth ® is a registered trademark
of LF, LLC. All rights reserved.
Lowes.com/allenandroth
5