Complete The Installation - Kohler K-2823 Manual Del Usuario

Center Brace
Bolts
Acorn Nut
Threaded Rod

2. Complete the Installation

Complete the Assembly
Stand the pedestal upright.
Position the center brace in the pedestal with the opening away
from the front leg.
Attach the center brace to the pedestal with three bolts.
Tighten the bolts with a 1/4" hex wrench.
Install the threaded rod and acorn nut to the retainer hub.
Securely hand tighten the acorn nut.
Tighten the leg bolts securely.
Installation
Move the assembled pedestal into position along the reinforced
wall, with the front leg outward.
Position the back legs 5-5/8" (143 mm) from the finished wall.
Remove and discard the masking tape from the front leg.
Install the bathroom sink to the wall following the bathroom sink
installation instructions.
Adjust the levelers as needed to eliminate wobble and level the
bathroom sink.
1218951-2-B
Finished Wall
4
5-5/8"
(143 mm)
Kohler Co.