CHIEF MSP-DCCUST1 Instrucciones De Instalación página 9

Installation Instructions
2. Lift short throw projector arm (A) up to wall plate (B) and
place projector arm slots over wall plate hooks. (See
Figure 11)
(A)
2
Projector arm slots
Figure 11
3. Fasten short throw arm (A) to wall plate (B) using two
1/4-20 x 3/4" button head cap screws (HD). (See Figure 12)
Figure 12
Projector Installation
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer's responsibility to make sure the weight of the
projector does not exceed 25 lbs (11.3 kg).
(B) Wall plate hook
(G)
(HD) x 2
3
1. Insert and slightly tighten three M4 x 10mm Phillips pan
head screws (HA) into the projector threaded inserts. (See
Figure 13)
(HA) x 3
1
Back of
projector
Figure 13
2. Raise the projector up to the projector arm and slide three
screws into slots on the projector arm. (See Figure 14)
3. Add one remaining M4 x 10mm Phillips pan head screw
(HA) through the projector arm and into the projector. (See
Figure 14)
4. Tighten all four fasteners.
2
Projector
Figure 14
5. Slide projector along short throw projector arm until image
is the correct size on screen.
MSP-DCCUST1
(HA) x 1
3
9