Troubleshooting Guide; Technical Service - Portfolio PF-4305 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SYMPTOM
POSSIBLE CAUSE
Light will not
1. Light switch is turned off.
come on.
2. Bulbs are loose or burned out.
3. Fuse is blown or circuit breaker
is turned off.
4. Daylight turn-off is in effect (re-
check after dark).
5. Incorrect circuit wiring, if this is
a new installation.
Light comes on
1. Sensor may be installed in a
in daylight.
relatively dark location.
2. Sensor is in Test. (Set control
switch to an ON-TIME position.)
Light comes on
1. Sensor may be sensing small
for no apparent
animals or automobile traffic.
reason.
(Reduce sensitivity.)
Please call 1-800-858-8501 for assistance before returning product to store.
If you experience a problem, follow this guide.You may also want to visit our Web site at: www.desatech.
com. If the problem persists, call* for assistance at 1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F).
You may also write* to:
DESA Specialty Products™
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information available: Model Number, Date of
Purchase, and Place of Purchase.
This is a "Limited Warranty" which gives you specific legal rights. You may also have other rights which vary from state to state or
province to province.
For a period of three years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be
corrected at no charge to you.
Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other ex-
pendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component
will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of
use, unauthorized service, or return shipping charges.
This warranty covers only DESA Specialty Products™ assembled products and is not extended to other equipment and components
that a customer uses in conjunction with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY,
REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PUR-
POSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON
THE PART OF DESA SPECIALTY PRODUCTS™ FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states
or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you. Proof of purchase is required for warranty claims.

TROUBLESHOOTING GUIDE

TECHNICAL SERVICE

No Service Parts Available for this Product
THREE YEAR LIMITED WARRANTY
SYMPTOM
POSSIBLE CAUSE
Light stays on
1. There is a heat source like an
continuously.
2. Sensitivity is set too high.(Reduce
Light flashes on
1. Sensor is in the Test mode. (While
and off.
Light does not
1. Nearby large, light-colored objects
stay on in Man-
ual mode.
6
air vent, dryer vent, or brightly-
painted, heat-reflective surface in
the coverage area. (Install shield
on sensor in the direction of heat
source.)
sensitivity.)
in TEST mode, light only stays on
for 5 seconds.)
reflecting light may trigger the
shut-off feature.Do not point other
lights at the sensor.
598-1168-03
Tabla de contenido
loading

Tabla de contenido