DESCRIPTION
A Steam Head
B Steam head holder
C Hanger
C1 Lock button for hanger
foldability
D Trouser clips *
E Adjustable pole
F Pole locking clips
G Woven fabric steam hose
G1 Hose Lock
H Hose Connector
* Depending on model
1. ASSEMBLY
1. Insert the pole in the housing & then lock.
2. Open the 2 pole locks.
3. Extend the pole fully.
4. Close the 2 locks.
5. Fully insert the hanger vertically on top of the pole.
6. Position the steam head on the holder of the hanger.
7. Lock the extremity of the steam hose (G1) to the connector(H)
located on the product base.
2. BEFORE USE
1. Remove the water tank.
2. Remove the cap then fill the water tank.
3. Fully screw the water tank cap and insert tank back into the appliance.
4. Place the garment on the hanger.
I
ON/OFF switch + 2 steam
setting button
I1 ON/OFF Light indicator
I2 High steam level position
I3 Low steam level position
J
Removable Water tank
K Steam head brush *
L
Glove *
EN
9