Idiomas disponibles
Idiomas disponibles
MDS-CITY DIGITIZER MODULE
Ref. 2440
Cod. 94078 V: 09-01
MODULE DESCRIPTION
PC link connector
Programming Button
Selection
button
Pull-Up Resistors (*)
Amplifier
Information Display
Direct audio Switcher
SW3
POSITION) allows you
to have direct speech
with Outdoor Panel
from every decoder.
Input BUS connectors
Output BUS connectors
Extension Call Packs
Connector or Citymax
Digital Pushbutton Mo-
dules connector
(*)IMPORTANT:
(*)IMPORTANT:
(*)IMPORTANT:
(*)IMPORTANT:
(*)IMPORTANT:
Cut pull-up resistors (under the sticker) if it is specified in the Wiring diagram.
MODULE PROGRAMMING SEQUENCE:
1
2
Factory default code: 19025
1
2
Factory default code: 19025
Remark: You can also program Digitizer modules through a PC and the PC-DECODER Interface (Ref. 2466).
DECODER PROGRAMMING SEQUENCE USING CITY PANELS
1
2
(digitizer)
ASSEMBLING ON A CITY PANEL:
1
2
City Panel default wiring :
Change connections:
connector
set
(ON
3
4
6
4
4
6
3
TO PROGRAM ANOTHER DECODER REPEAT
3
Modify Digitizer cable:
4
5
4
4
Plug in connectors and connect wires as shown below:
6
7
5
Remarks:
(1) You can also program decoders by means of a MDS-Digital or a MDS-Direct panel and a PC-
DECODER Interface (Ref. 2466).
(2) IN INSTALLATIONS WITH MANY BLOCKS FIRTLY PROGRAM THE BLOCK NUMBER
IN THE DIGITIZER, THEN PROGRAM THE DECODERS.
ASSEMBLING ON A CITYMAX MODULAR PANEL:
8
A
B
B
6
