Maintenance / Cleaning and care / Disposal / Warranty and Service
First take the work light out of the frame (see
i
"Assembling/disassembling the work light").
Place the work light down with its lamp guard
i
at the bottom on the floor.
CAuTIOn! Place a soft cover or similar item
on the supporting surface first to avoid scratch-
ing the lamp guard
Screw out the screws
i
using a Phillips screwdriver (see Fig. G).
Carefully turn the work light over so that the
i
lamp guard
is at the top.
2
Carefully lift off the lamp guard
i
Carefully move the retaining clip
i
socket
of the defective lamp
17
with your thumb (see Fig. H).
Release the rubber tabs
i
(see Fig. H).
Withdraw the defective bulb
i
upwards out of the socket
Only then should you draw the defective lamp
i
out of the clamps
19
Push a new lamp
20
i
into the clamps
.
19
Push the lamp
carefully into the socket
20
i
Fasten the rubber tabs
i
(see Fig. H).
19
Carefully press in the retaining clip
i
socket
of the defective lamp
17
downwards with your thumb (see Fig. H).
Put on the lamp guard
i
Carefully turn the work light over so that the
i
lamp guard
lies on the floor.
2
CAuTIOn! Place a soft cover or similar item
on the supporting surface first to avoid scratch-
ing the lamp guard
Screw in the screws
i
Phillips screwdriver (see Fig. G).
Place the work light back on to the frame (see
i
"Assembling/disassembling the work light").
Cleaning and care
Q
WARnInG!
Pull the mains plug out of the
mains socket before you carry out any task on the
device. Otherwise there is a danger to life!
.
2
counterclockwise
15
.
2
on the
16
upwards
20
from the clamps
18
19
carefully
20
.
17
20
.
(55 W, PL compact lamp)
17
back on the clamps
18
on the
16
again
20
back on the work light.
2
.
2
clockwise using a
15
Clean the product using a slightly moist,
i
fluff-free cloth.
2
Disposal
Q
The packaging is made entirely of recyclable
materials, which you may dispose of at your local
recycling facilities.
never dispose of electrical appli-
ances in the household waste!
In accordance with European Directive 2002/96/EC
on used electrical and electronic appliances and its
implementation in national law, used electrical ap-
pliances must be collected separately and recycled
in an ecologically compatible manner.
Details of current options for disposing of electrical
appliances after their useful life can be obtained
from your local or city council.
.
Warranty and Service
Q
Warranty Declaration
q
This instrument has a 2-year warranty from the date of
purchase; the warranty is only valid for the original
purchaser and is not transferable. Please retain
your receipt as proof of purchase. The warranty
applies to material or manufacturing defects only. It
does not cover wear parts or damage caused by
improper use. The warranty shall expire in the
event of third-party intervention. This warranty shall
not affect your statutory rights. Please contact the
service centre by telephone in the event of any
claims under the warranty. This is the only way to
ensure that your instrument can be returned free of
charge.
GB
15