English
1. General Instructions
The general instructions for storage systems, material no. 103041, in the current version, must be ob-
served.
No modifications or alterations can be made to the product without authorisation from the manufacturer, in
the event of this, the guarantee will be invalidated.
National standards and safety regulations must be observed.
2. Safety instructions
The storage of flammable liquids of the danger classes R10, R11 and R12 in accordance with
regulations governing hazardous materials is prohibited.
If you are storing liquids included in the groups below, evidence of the density and media resistance of the
sump materials is not required:
•
Watery solutions from organic acids up to 10%, mineral acids up to 20% such as acidic hydrolysing
salts in watery solutions (pH<6), apart from hydrofluoric acid, oxidising acids and their salts.
•
Inorganic alkalis such as alkaline hydrolysing salts in watery solutions (pH>8) apart from ammonia
solutions and oxidising solutions from salts (for example hypochlorite).
•
Inorganic solutions, non-oxidising salts with pH values between 6 and 8.
3. Use and intended purpose
The acid and alkali cabinet is used for the safe storage of hazardous materials in small containers hold-
ing up to 25 l. The shelf insert enables the storage of small containers and can be taken out if neces-
sary. Additional shelf inserts are available as optional extras.
The operational temperature range is from -20°C to +40°C.
Ensure the material of sump is resistant to that material you intend to stock. See the gen-
-
eral instructions for storage systems.
4. Technical details
The acid and alkali cabinet is made from LLDPE, has a sump and a built-in steel or PE grid and can be
locked with a PVC jalousie.
To store small containers insert shelves can be installed. These shelves each lie on two bars which are
screwed to the side walls.
5. Assembly
Position the acid and alkali cabinet at ground level and check that it is standing securely, adjusting if
necessary.
6. Specifications
See type label
Säuren- und Laugenschrank PSR 8.8
172544, 172545
Seite 6 von 12 Seiten
Ausgabe 10/2008