Using Batteries; Important Advice For Use; Control And Functions - SIDAS PRO-S V2 HEAT SET Manual De Instrucciones

Important advice:
• Recharge the Sidas batteries after each use.
This extends the service life of the batteries and ensures that
the device is always ready for use.
• The batteries consist of lithium ion cells and can be charged
in any state. For this reason, the battery does not need to be
fully discharged before charging.
• When starting the charging process, the Sidas batteries can
be in any operating mode (POWER OFF, IN USE)
• The full charging capacity of the Sidas batteries can only be
conserved if the Sidas batteries are removed from the charging
station after the charging procedure is complete.
Charging time: 3 to 6 hours using Sidas wall plug universal
charger with USB port.

USING BATTERIES

• Put on the Sidas Pro-Heat socks.
• Insert the batteries into the little pouch at the top of each sock
and press the two connector buttons until you hear a click
( fig 2.5 ).

IMPORTANT ADVICE FOR USE

• Do not leave the batteries at the maximum heat setting for
more than a few minutes; prolonged use may raise
the temperature excessively and cause burns.
• Always switch the batteries to the low or moderate setting to
maintain the feet at a comfortable temperature (the heating
effect should be almost imperceptible).
• Never use the heating socks at the same time as heating
insoles to avoid excessive heat: risk of burns!
CONTROLS AND FUNCTIONS
Switching on the batteries:
Briefly press (for approx. 1 second) the «+» or «-» button
( fig. 2.6 ) to adjust the batteries to the lowest heat setting.
Changing the heating setting:
- Use the «+» or «-» button ( fig. 2.6 ) to set the batteries
to the three different heating modes.
- Each time you press the «+» or «-» button, this changes
the heat setting.
Battery off.
Low heat setting.
Moderate heat setting.
High heat setting.
7