Description Of The Device; Technical Specifications; Charging Batteries - SIDAS PRO-S V2 HEAT SET Manual De Instrucciones

DESCRIPTION OF THE DEVICE

Batteries
• Connector buttons for connection to the charger and heating
sock ( fig. 1.1 ).
• Heating mode display ( fig. 1.2 ).
• + / - adjustment button ( fig. 1.3 ).
USB charging cable
• USB Charging cable unit ( fig. 2.1 ).
• Charge indicator ( fig. 2.2 ).

TECHNICAL SPECIFICATIONS

USB power supply* Input
(incl. country-specific 100V - 240V ~
adapters) (50 - 60 Hz),
max. 300 mA
USB charging cable** Input: 5V
max. 2000 mA
Pro-S battery Output: 3.7 V / 2800 mAh
Neo-S battery Output: 3.7 V / 1400 mAh
* Optional accessory from Sidas
** Available in retail locations or from Sidas

CHARGING BATTERIES

Important note:
Batteries must be charged before first use.
USB cable charging process
1 - Plug the USB cable into a USB socket. The charge indicator
Output
2 - LED blinking on USB charger between green and red when
5V / 2000 mA
3 - Once the Sidas batteries are fully charged, the charging
Output
4.2V / 2000 mA
4 - Remove both Sidas battery from the charging shaft.
5 - After the Sidas batteries have been charged, they are
( fig. 2.2 ) will light up green.
Next, slide both Sidas battery into the charging shaft
of the charger ( fig. 2.3 ). Please check the illustration
on the charger to ensure proper orientation.
The Sidas batteries can be charged in any operating mode.
The charging process will start automatically and the charge
indicator ( fig. 2.2 ) will light up in red during charging.
charge above 95%.
process is automatically concluded and the LED on
the charge indicator ( fig. 2.2 ) remains green.
automatically in POWER OFF mode.
6