Calling Up The Data Stored In Memory - Citizen CHU503 Manual De Instrucciones

CALLING UP THE DATA STORED IN MEMORY

90 measurement results can be stored in Memory.
The average value is calculated automatically to help you manage your daily health.
1
Press the
* Example of display when the
Memory switch is pressed.
indicating the average value appears at the bottom of the display. Then the
average value, based on the last three measurements, is displayed.
* ( and the average value do not appear if there are two or fewer measurements
stored in memory.)
2
If you press the
displayed.
Each time you press the switch, the measurement data are displayed in order
from the most recent to the oldest.
* You can fast-forward the data numbers in display by pressing and holding the
Memory switch.
* Example of display when the
Memory switch once.
SYS DIA
mmHg mmHg
Memory switch again, past measurement data are
SYS DIA
mmHg mmHg
The data number is
displayed before the
measurement results.
- Eng 14 -
SYS
mmHg
Memory switch is pressed.
SYS
mmHg
Memory switch
DIA
mmHg
DIA
mmHg