Before First Use; Filter Removal; Operating The Appliance - Morphy Richards 43128MEE Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
43128MEE
2/4/07
15:24
4
Page 4
¤
·
Features
⁄ Lid
¤ Lid release button
‹ Spout filter
› Concealed element
fi 360°connector
fl Cordless base unit
‡ Cord storage
· On/off switch power on light
‚ Water level indicator

Before first use

Before using the appliance for the
first time, fill with water, boil and
pour away.

Operating the appliance

1
Wherever possible fill through the
spout, as this helps to free the filter
from limescale build-up.
IMPORTANT : When filling from a
tap, care must be taken to avoid
striking the glass body on the tap.
Always ensure that the level of
water in the kettle is filled to at least
the minimum level shown on the
water level indicator.
Boil only as much water as you
need as this saves electricity.
2
Place the kettle on the base unit,
ensuring the kettle locates on to the
360° connector.
The 360° connector allows the
kettle to be located at any position.
- ideal for left and right handed
users and for convenient positioning
on worktop.
3
Plug in and switch on at the wall
socket.
4
Switch the kettle on. The 'power on'
neon and the kettle glass body, will
light up.
5
When the water boils the kettle will
switch off automatically.
If you are using the kettle for the
first time, pour away the boiled
water and refill.
6
Lift the kettle from the base unit by
the handle ensuring you hold the
kettle level.
To re-boil, switch to ON again. If the
kettle has just switched off wait a
minute or so before switching it
back on again.
If you do not put in enough water, or
switch on the kettle when it is
empty, the safety cut-out will switch
off the power automatically. If this
happens, refill and wait a few
minutes for the element to cool,
then use as normal.

Filter removal

1
Open the lid using the release
button ¤.
2
Lift the filter upwards to remove.
3
To refit the filter, slide it into the side
guides of the filter holder until it
clicks into place. Ensure the filter is
correctly located.
WARNING: Unless the filter is
fitted correctly, the kettle lid
may not close and the kettle
may not switch off after boiling.
Tabla de contenido
loading

Tabla de contenido