Tabla de contenido
Idiomas disponibles
Idiomas disponibles
905013144 wo depth
11/28/06
Problem
• LED status indicator is
flashing red.
• LED status indicator is
staying on RED .
• Nail will not fire.
• Unit will not start.
• Battery pack will not
charge.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
Accessories
Recommended accessories for use with your tool are available from your local dealer
or authorized service center. If you need assistance regarding accessories, please
call:
1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this tool
could be hazardous.
Service Information
All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice or repair (this product is not user serviceable) contact the Black & Decker
location nearest you. To find your local service location, refer to the yellow page
directory under "Tools—Electric" or call:
1-800-544-6986 or visit www.blackanddecker.com
Full Two-Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no
charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer
from whom it was purchased (provided that the store is a participating retailer).
Returns should be made within the time period of the retailer's policy for exchanges
(usually 30 to 90 days after the sale). Proof of purchase may be required. Please
check with the retailer for their specific return policy regarding returns that are beyond
the time set for exchanges.
7:43 AM
Page 10
T T
r r
o o
u u
b b
l l
e e
s s
h h
o o
o o
T T
r r
o o
u u
b b
l l
e e
s s
h h
o o
o o
Possible Cause
• Nail jammed in the
• Engage lock off. Disconnect
nosepiece.
battery. Release pusher from
behind nails. See page 9.
• Battery is low or out of
• Recharge battery.
power.
• Contact trip is not fully
• Depress the contact trip
depressed.
firmly against the work
surface. Depress and
maintain pressure on the
trigger.
• Battery pack not
• Check battery pack installation.
installed properly.
• Battery pack not
• Check battery pack charging
charged.
requirements.
• Battery pack not
• Insert battery pack into charger
inserted into charger.
until red LED appears.
• Charger not plugged in.
• Plug charger into a working outlet.
Refer to "Important Charging Notes"
for more details.
• Surrounding air
• Move charger and battery pack
temperature too hot or too
to a surrounding air temperature
cold.
of above 40 degree F(4,5°C) or
below 105 degree F (+40,5°C).
10
t t
i i
n n
g g
t t
i i
n n
g g
Solution
Tabla de contenido
