Pairing The Headset; Making And Answering / Ending Calls - Mr Handsfree Blue Chameleon Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

You are required to pair the Blue Chameleon headset with your mobile phone once before using it.

Each Blue Chameleon headset has a default PIN-code 0000 for pairing, which is stored in its internal memory.

You are usually required to enter the PIN-code 0000 in a pairing process with a Bluetooth

other devices; however it depends on the kind of Bluetooth

The Blue Chameleon headset must be turned off before initiating pairing.

until the blue indicator (4) lights up constantly.

process on your Bluetooth

your mobile phone.)

Select Blue Ch-I out of the list with found devices on your mobile phone.

asked to enter the PIN-code to complete pairing, enter 0000 and confirm it.

successful, the blue indicator (4) of the headset will flash 10 times quickly.

Note:

If the Blue Chameleon headset is not in pairing mode, your mobile phone won't find the headset.

Please set the headset into pairing mode before letting your mobile phone search for the headset.

If no pairing is possible for a period of time (approx. two minutes), the headset will automatically leave

pairing mode. You may need to start all over again.

The Blue Chameleon headset can pair up to 8 devices. The different devices are stored in a list in the

internal memory of the headset.

If you wish to pair more than 8 devices, the less recent paired device will be automatically deleted

from the list.

b .

All devices (max.8) that are on this list, can be connected to the headset.

When turning on the headset, it will automatically connect to the device it was last connected with.

If you want to connect the headset with another device of this list, you have to start the procedure

from this device. This device then becomes the last connected device on the list.

Paired devices remain paired even when:

• One of the devices is not turned on.

• A service connection is interrupted or the service stopped.

• One or both devices are rebooted.

MAKING AND ANSWERING / ENDING CALLS

Once the Blue Chameleon headset is successfully paired with your mobile phone, you can use it to make and

receive calls. The Blue Chameleon headset can be used with voice dialing if your mobile phone supports this

feature. (Please check the manual of your mobile phone).

MAKING CALLS

Using voice dialing:

Press the MF-button (3), wait for a beep and say the name of the person you want to call.

(3) again to cancel voice dialing.

Using the phone keys to make a call:

Enter and dial the number on the mobile phone as you normally do.

sound will be transmitted to your headset automatically.

m_BlueChameleon_GB.pmd