Cue Bpm / Depth (Y) Parameter Display - SYNQ SMX-1 Manual Del Usuario

USER MANUAL
24. PRESET BUTTONS: These buttons are used as presets for the different effects.
Depending on the selected effect, these presets can be settings related to the
beat, filter frequencies, percentage of pitch change, etc... Each button has one of
the following inscriptions: 2 – 4 – 8 – 16 – 32. These digits are related to the
measured beat. Once the preset is selected, it lights up. You can also select the
additional presets by pushing the "time parameter knob" (33) while you select the
presets 4 – 8 or 16. In that case the preset button starts flashing to indicate that the
indication above the button (1/4 – ½ or 1/1) is selected. It's good to know that the
presets are preserved when you change to another effect.
Example: if the "echo" effect is selected and you choose for preset "2", you will
notice that the sound is repeated every 2 beats. If you choose "4", the sound
repeats every 4 beats. Select the ½-preset if you want the music to be repeated
every half beat.
25. EFFECTS BPM DISPLAY: Indicates the BPM (Beats Per Minute) of the effects
unit. When the beat counter is unable to count the beats, the BPM display starts
flashing until the BPM counter is able to continue.
26. TIME (X) PARAMETER: for certain effects the display shows time information
(mSec) for other effects the display shows percents (%) or cutoff frequencies
(kHz). You can change these parameters with the preset buttons (24) and with the
"time parameter knob"(33) if you need fine tuning.
27. CUE BPM / DEPTH (Y) PARAMETER DISPLAY: Displays the BPM value for the
cue signals coming from one of the 4 input channels, (CH-1 to CH-4) selected
using one of the CUE-buttons (39). When you adjust the depth (Y) parameter
knob(32), the new value will be displayed (%).
28. EFFECTS DISPLAY: Shows which effect you selected.
29. EFFECTS INPUT DISPLAY: Shows which signal you selected using the "input
select knob"(30).
30. INPUT SELECT KNOB: Used to select which signal goes to the input of the
effects unit. This can be one of the following:
• One of the input channels.
• One of the channels you selected with the "cross fader assign
buttons"(10). This can be the left side "A" or the right side "B" of the cross
fader.
• If you select master, the effects will be used on the mixed master sound.
31. EFFECTS SELECTOR: Used to select the desired effect:
IMPORTANT!
The crossover effects and the multi-effects unit cannot be used together!
Before you can use the multi effects, you have to switch the crossover
effects off (see n°:15 for more information)
• ECHO: produces repeated sounds. You can easily mix beat synchronized
echos while selecting the desired "preset"(24). These presets can be
tuned with the "Time parameter knob"(33) in a range from 2mSec up to
2Sec. With the "Level parameter knob"(32) you can change the balance
between the original and the delayed sound.
• AUTO PAN: Sweeps the music from left to right and back to the rhythm of
the beat. With the "presets"(24) you can choose how fast the music
sweeps from one side to the other. (example: With preset "2" it will take
2beats to go from left to right and back) The presets can be tuned with the
"Time parameter knob"(33) in a range from 30mSec up to 16Sec. With the
"Level parameter knob"(32) you can adjust how quick the music will be
panned to the opposite side: you can choose for a gently pan or an
aggressive one.
SYNQ 7/63
ENGLISH
SMX-1 DJ-MIxer