Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician
for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
Using the ground wheel
• Check if your turntable got a built-in amplifier.
If you have got a built-in amplifier, you do not have to use the
ground wheel A
switch off your built-in amplifier.
Follow these steps to connect earth to ground:
-
Do not use any tools.
1. Turn A
5
counter clockwise.
2. Insert a ground cable (not included) from your turntable into
A
.
5
3. Turn A
clockwise to fix A
5
Connecting the product
Make sure all the devices are switched off before
4
connecting the product.
1. Plug a turntable into the RCA input A
cable (not included).
2. Plug the speakers into the RCA output A
cable (not included).
3. Plug the power adapter A
4. Plug the power adapter into a power outlet.
Using the product
• Use the power switch A
The power indicator LED A
5
, but if you want to use the pre-amplifier,
7
2
to switch the product on or off.
1
lights up.
back in place.
5
3
using a twin RCA
4
into the power input A
5
using a twin RCA
6
.
Tabla de contenido
