Safety Information - Amprobe TPP1-F1 Manual De Uso

TPP Mini-Thermometers

Safety Information

•
Do not use the thermometer if:
•
It appears to be damaged.
•
It does not carry out the desired measurement.
•
When replacing the battery, make certain of the correct polarity.
•
Only use batteries as described in the Specifications section.
•
Use the thermometer only as specified in this manual, or the
protection provided by the thermometer might be impaired.
•
Thermometers must be stored in a dry and closed area. If a
thermometer is transported in extreme temperatures, a 2 hour
recovery time is required before use.
XWWarning
Shock danger. Supplied thermometer is not intended for contact
with live electrical circuits.
Symbols Used in this Manual
X Dangerous Voltage W
Introduction
The Amprobe models TPP1 and TPP2 are mini-thermometers with a
Negative Temperature Coefficient (NTC) sensor allowing for simple
and quick temperature measurement. Both models are available in
Fahrenheit and Celcius versions.
Model TPP1
Immersion thermometer for measuring the temperature in air, liquid,
or powdery materials.
Model TPP2
Thermometer with flat surface probe.
The manual contains information to allow you to safely operate and
maintain the TPP series of digital mini-thermometers. Please read the
manual before using the mini-thermometer.
XWWarning
Before making a measurement, verify that the surface to be
measured is not electrically live. Failure to comply can lead to
operator injury or instrument damage.
WCaution
Follow the specified thermometer measurement ranges.
WCaution
To avoid burns, only touch the unit under test using the
measurement probe.
1
Refer to the manual