Technical Specifications Hp 802; Power Supply - elettromedia HERTZ SPL Show HP 802 Manual Del Propietário

10 TECHNICAL SPECIFICATIONS
50
HP 802

Power Supply

Power supply voltage / fuse:
Idling current (power ON/OFF):
Consumption @ 1 Ω, 14.4 VDC
(Max Musical Power):
Remote In:
Amplifier Stage
Features:
Distortion - THD (100 Hz @ 4 Ω):
Bandwidth (filter off):
S/N Ratio (A weighted @ 1 V):
Damping factor (100 Hz @ 4 Ω):
Pre-In sensitivity:
Load impedance (MIN) @ 2 Ch:
@ 1 Ch:
Output Nominal Power (RMS) @ 14.4 VDC, THD 1%:
2 Ch:
2 Ch:
2 Ch:
1 Ch:
1 Ch:
Output Power (RMS) @ 14.4 VDC, THD 10%:
2 Ch:
2 Ch:
2 Ch:
1 Ch:
1 Ch:
Inputs / Outputs / Filter
INPUTS:
Pre out FULL range:
Filter Hi-Pass On/Off:
Hi-Pass:
Filter Lo-Pass On/Off:
Lo-Pass:
Filter Band-Pass:
Equalizer Freq.:
Equalizer Q:
Equalizer GAIN:
Size / Weight
Max size (mm / in.): 544 x 240 x 65,5 / 21.41 x 9.45 x 2.55
Weight (kg / lb.):
11 ÷ 15 VDC / 4 x 30 A
0.04 mA
100 A
7 ÷ 15 VDC - 1 mA
0.05 %
10 ÷ 55k Hz
103 dB
500
0.3 ÷ 5 VRMS (15 k Ω)
1 Ω
2 Ω
330 W x 2 (4 Ω)
550 W x 2 (2 Ω)
800 W x 2 (1 Ω)
1100 W x 1 (4 Ω)
1600 W x 1 (2 Ω)
380 W x 2 (4 Ω)
630 W x 2 (2 Ω)
900 W x 2 (1 Ω)
1260 W x 1 (4 Ω)
1800 W x 1 (2 Ω)
PRE IN
Yes
Yes
50 ÷ 1k Hz / 500 ÷ 10k Hz
Yes
50 ÷ 1k Hz / 500 ÷ 10k Hz
50 ÷ 10k Hz (HI)
50 ÷ 10k Hz (LO)
50 ÷ 1k Hz
0.5 ÷ 2
+ 12 ÷ - 12
7,5 / 16.53