PSC Magellan 2200VS Guía De Referencia Rápida página 10

Green LED Indicator
The green LED indicates scanner status as shown in the table below..
Table 1-2. Green LED Indications
LED
INDICATION
a
Scanner (Green) LED on steady and
Scanner Active
dim
(Normal Mode)
Good Read
Scanner (Green) LED - bright flash
a
Indication
Scanner (Green) LED - Continuous
Program Mode
flashing
Indication
Sleep Mode
Scanner (Green) LED flashes slowly
Indication
Scanner (Green) LED 1-second off, 1/
Host Disabled
10-second on
Audible low tone 1 second. LED
Field Replace-
flashes continuously.
able Unit (FRU)
Warning (Error
Mode)
Scanner (Green) LED flashes a
coded sequence in concert with the
speaker.
FRU Indication
a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be pro-
grammed to display all indications.
4
DURATION COMMENT
The scanner is ready for operation. Scanning is
immediately available.
Indicates a bar code has been read and decoded.
Indicates the scanner is in Label Programming
Mode. Cycle power to exit Programming Mode.
The scanner motor and/or laser have automati-
cally switched off and the unit has entered Sleep
Mode due to extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure has been
detected. Call systems support for service.
Occurs ONLY upon Volume/Tone button push fol-
lowing a FRU warning. Enables service techni-
cians to identify FRU failures.
Magellan
® Ω
2200VS/2200VS