Cleaning And Maintenance - MOA AC199A Manual De Instrucciones

EN

CLEANING AND MAINTENANCE

After operation for long time, the dust cumulated in the dust filter
or cooling pad may influence the inflow of air. Therefore it is
recommended to clean your fan regularly. Please follow the steps below
to clean your device.
Turn off the unit and unplug the power cord before cleaning and
maintenance.
1. Dust Filter
To remove the dust filter, first remove the screw, then simply press the
locks with both hands and pull it out. Use neutral cleaning agent and
brush to clean the dust and dirts on the filter. To attach the clean filter,
place the bottom of the filter first and then push upper part until it is
locked tightly.
2. Cooling Pad
After removing the dust filter you can see the cooling pad. Press the
lock in the middle and gently pull out the pad. Use a clean or soft brush
to remove dust and dirt from the pad. Rinse with water if needed and
leave it to dry in open air. Never use any chemical cleaning solution
that can harm pad.
3. Water Tank
Turn the water tank lock to horizontal position and pull the tank. Use
soft cleaning agents for cleaning. Wash with water and rinse the place
it to its housing by pushing gently. Turn the lock to vertical position.
4. Exterior Cleaning
Clean the exterior case of the fan with a soft damp cloth except control
panel. Never use hard cleaning agent that can harm the case. Make
sure the unit is dry before operating it.
Caution: Never let water contact with the control panel. Always clean it
with a soft dry cloth.
8
Aircooler - English Instruction Manual