Installation Of The Refrigerator - Samsung RS263B Serie Manual De Propietario E Instalación

DA99-01278A(0.4)EN1 2007.12.6 11:41 AM 페이지17 in

INSTALLATION OF THE REFRIGERATOR

Dimension
(inches)
NOTE
NOTE
- Make sure the "UP" mark on the rear
of the handle is facing right side up.
- Match the upper and lower Handle
Locking Tabs on the doors to the
handles.
Checking the Dimensions of your Entrance Door
Check the dimensions of your entrance door to determine whether the refrigerator can pass through it.
Model
Capacity (Cu. Ft)
Case Height
Depth
Selecting the Location for the Refrigerator
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Select a location with level floor or close to it.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line can be damaged.)
• See "Separating the water supply line from the refrigerator" on the next page.
Allow sufficient space to circulate the air in the internal cooling system.
• When the refrigerator does not have enough space, the internal cooling
system may not work correctly.
Allow clearance to the right, left, back and top when installing the
●
refrigerator. This has the advantage of reducing power consumption.
Do not install the refrigerator where the temperature will go below
●
50°F(10°C).
How to assemble the separable door handle (optional)
RS263/RS264/RS265/RS267/RS269
Width
without Hinge
with Hinge
with door
without door
Fix the handles to the doors
by sliding them down firmly.
17
26.1
35.9
68.8
70
34
30.5
4inches
2 inches
0.1inch
- Check the installation of the handles
by pulling on them.
- If the handles have been inserted
correctly, they should not move.