Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CASTER SAFETY..................................................................................2
ASSEMBLY INSTRUCTIONS...............................................................2
Tools and Parts ..................................................................................2
SEGURIDAD DEL RUEDECILLA .........................................................4
INSTRUCCIONES DE ENSAMBLAJE.................................................4
Piezas y Herramientas .......................................................................4
SÉCURITÉ DE ROULETTE ..................................................................6
INSTRUCTIONS D'ASSEMBLAGE......................................................6
Outils et pièces...................................................................................6
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
Check that you have everything necessary for correct assembly.
Proper assembly is your responsibility.
Tools Needed:
¹⁄₂" Socket wrench or nut
driver
¹⁄₂" Wrench
Parts Supplied:
Rigid Casters (2)
Swivel Casters (2)
⁵⁄₁₆-18 Self-locking hex-
nuts (16)
⁵⁄₁₆-18 X ⁷⁄₈" Hex-
head bolts (16)
2
TABLE OF CONTENTS
TABLE DES MATIÈRES
CASTER SAFETY
Your safety and the safety of others are very important.
ASSEMBLY INSTRUCTIONS
³⁄₈" Socket wrench or nut
driver
¹⁄₄-20 X 1 ¹⁄₄" Hex-head bolts
(4)
¹⁄₄-20 x 1 ¹⁄₄" lock washers (4)
Caster brackets (located in
FeaturePak) (2)
Plastic skids (shipped with
the convertible refrigerator/
freezer)
Unpack the Casters........................................................................... 2
Install Casters .................................................................................... 2
Complete the Assembly .................................................................... 3
ÍNDICE
Desempaque las ruedecillas ............................................................. 4
Instale las ruedecillas......................................................................... 4
Complete el Ensamblaje.................................................................... 5
Déballage des roulettes..................................................................... 6
Installation des roulettes.................................................................... 6
Achever l'assemblage ....................................................................... 7
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
1. Open the lower compartment door and remove the box
containing the casters from the full width wire basket.
2. Close the lower compartment door.
Use two or more people to move and install
refrigerator/freezer.
Failure to do so can result in back or other injury.
NOTE: Install the casters before you install any of the FeaturePak
items.
1. Open the lower compartment door and remove the base grille.
Remove the grille by grasping the grille with both hands, lifting up
and pulling bottom of the grille toward you.
Unpack the Casters
Install Casters
WARNING
Excessive Weight Hazard
convertible
Tabla de contenido
