En Xbox One Setup - LucidSound LS20 Guía De Uso

EN XBOX ONE SETUP

Controllers with 3.5mm port
1
With the headset powered on, press and hold
the power/mode button until the LED changes
to Purple.
2
Connect one end of the Xbox One chat cable
to the 3.5mm port on the headset and the
other end to the 3.5mm port on the Controller.
3 On the Xbox One, go into All settings >
Kinect & devices > Devices & accessories
and choose the Xbox One Wireless Controller
in use.
4
Select 'Volume' and set 'Headset volume' to
maximum and 'Mic monitoring' to minimum.
Make sure that 'Headset mic" is turned
to 'On.'
5
Set 'Headset chat mixer' for the desired level
of chat and game audio balance (default is
50%). You can now use the controls on the
headset to adjust volume and mute.
Controllers without 3.5mm
If the Xbox One Controller does not have
a 3.5mm port, an Xbox One Stereo Head-
set adapter is required (not included).
1
With the headset powered on, press and
hold the power/mode button until the LED
changes to Purple.
2
Connect one end of the Xbox One chat
cable to the 3.5mm port on the headset and
the other end to the 3.5mm port on the Stereo
Headset Adapter.
3
Adjust the game/chat balance on the
Stereo Headset Adapter for the desired level of
chat and game audio balance.
4
Adjust the volume on the Stereo Headset
Adapter to Maximum. You can now use the
controls on the headset to adjust volume
and mute.
XB1
port