Advanced Settings; Operating Mode - Elnur Gabarron ECOMBI SOLAR Serie Instrucciones De Uso

3.- ADVANCED SETTINGS

With the general settings menu, you can make additional changes and adjustments in device start-up and operation. To access the
settings menu of the device, press and hold the
with the screen lit. The following screen appears:

3.1. Operating mode

Scroll down to Operating Mode and press
selectable operating modes:
-
Basic mode or 24-hour temperature mode: The storage heater retains the setpoint temperature for 24 hours. In this
mode, the device automatically regulates and adjusts its charge day by day in order to maintain the temperature selected
with minimum expense. To change the basic mode setpoint temperature value, simply press
is operating in this mode until the desired temperature is displayed. The setpoint temperature and the charge level are
displayed on the screen in this mode.
- Weekly programme: The setpoint temperature varies in accordance with the weekly programme set in the unit. 3
temperature levels (Comfort, Eco and Frost Protection) can be selected for each time interval (1 hour) in order to adjust
the temperature of the room to the habits and needs of the different users. You can alter the setpoint temperature of each
of the 3 temperature levels (See section 3.3.1 Temperatures. Edit Programme) as well as the corresponding temperature
level at each hour of the week. (See section 3.3.2 Weekly programme. Edit programme). The horizontal temperature
display for the 24 hours of the current day appears on the screen together with the setpoint temperature of the current
period.
- Off: The storage heater does not retain any temperature or follow any programming, as it retains the time setting previously
set. The compensation element will be activated if the room temperature is below the Frost Protection in order to prevent
freezing. The set point temperature (3ºC) and the Frost Protection message appear on the screen.
button for 5 seconds in the home screen of any operating mode of the device
Use
or
the desired setting.
to access the operating mode selection menu. A new screen will appear with the
ADJUST SETPOINT TEMPERATURE
18
to move up and down. Confirm with
to enter
or when the device