Technical Parameters; Assembly And Operation - Gima 1023A Manual De Instrucciones

3
1 ABOUT THIS MANUAL
This manual shall only be used for the reference of operation of this particular model. If the
manual is used for other purposes, we will not undertake any according consequences and
responsibility.
All information of this manual shall be protected by copyright and shall not be copied and trans-
lated in any part of this specification without the written consent of manufacturer.
2 WARNING
• Do not stand on the product.
• Do not allow children play with the product.
• Do not place the equipment in damp places such as bathroom, do not expose to direct
sunlight.
• Do not use this product in the places where you are painting/spraying paints or producing
oxygen.
• People with physical impairment, tactile impairment, mental impairment, lack of experience,
common sense, or children are not allowed to use this product, unless the person responsi-
ble for their personal safety is present to monitor and guide them.
3 PRECAUTIONS
Operators should use this product in strict accordance with the instructions, and save this
manual for future reference.
• Comply with safe operating procedures, do not overload. Make sure the components of the
product are in good condition, eliminate the unsaft factors.
• Tighten the casters, backrests, and the seat regularly, to avoid malfunctions caused by loose
or falling parts.
• This product must not be used under faults. When abnormal phenomena or abnormal
sounds are found, please check about it immediately. Use after problem solved.
• Operator should be familiar with the precautions described in each chapter of the product
manual to ensure personal and product safety.
• Please place the equipment on a level ground.
• If the casters are damaged, please replace them before use.
• After each treatment, use a neutral reagent to remove the dust and stains on the leather and
wood.

4 ASSEMBLY AND OPERATION

1. Put the product to a proper location, according to the overall layout, the daylighting or arti-
ficial lightings and operation condition of the working environment. And keep it in the clean,
dry and cool environment.
2. Open the packing carton to check if the bed is intact and whether the accessories or spares
are complete. Please contact distributor or us if there's any problem.
3. Installation
This product graphic is only for display, the specific product structure please refer to the actual
product.
ENGLISH

5 TECHNICAL PARAMETERS

The product illustrations in this manual are based on the configuration parameters of standard
gas lift. If it is equipped with another optional gas lift, the parameters are subject to the actual
product.
Lifting Rated Load 170kg
Package Size 480x220x480mm
Net Weight
6Kg
Gross Weight 7Kg
6 MAINTENANCE
If there is grease, please wipe the surface with clean water and neutral reagent, and use a soft
cloth to remove dust and stains. It is forbidden to use alcohol, strong acid, strong alkali and
other solvents to prevent premature deterioration of plastic parts.
7 TROUBLESHOOTING
NOT WORKING 1 .Can't raise or lower the stool.
PROPERLY
2.Casters cannot rotate or move. 2. Replace the caster.
If problem is still not solved after above operation, please contact maintenance center or sup-
plier to solve it.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
1.Replace the gas lift.