CHAPTER
11
Specifications
This chapter includes the following sections:
•
"S450 Specifications" on page 165
•
"S450 Regulatory Compliance" on page 166
•
"Limitation of Liability" on page 167
S450 Specifications
The Symantec S450 is available in the following configuration:
Parameter
CPU
Memory
SAS Storage
NVMe Storage
SPI Flash
Boot Devices
Network Ports
Additional Ports
PCIe Riser Cards
Front Panel LEDs
Rear Panel LEDs
Power Supply
Specification
(1 or 2) Intel Xeon family of processors
(24) DDR4, LRDIMM slots, 768GB maximum
(4) SAS HDDs or SSDs, 3.5 inch or 2.5 inch, hot-swappable
(4) NVMe PCIe SSDs, 2.5 inch 7 mm, hot-swappable
(1) ME, 64MB, fixed
(2) ME, 32MB, imageable
(2) M.2 2242 SSD 64GB (redundant)
(4) 100/1000/10G Base-T copper with bypass (2:0, 2:1, 2:2, 2:3)
(2) 100/1000/10G Base-T copper for management (0:0, 1:0)
(2) RJ-45 serial
(1) USB 3.0
•
Small riser card, one half-height PCIe expansion card (slot 3)
•
Large riser card, either one full-height PCIe expansion card (slot 4) or two half-height PCIe
expansion cards (slots 4–5)
•
Power Status
•
System Status
•
SAS and NVMe storage (when bezel is open)
•
Power supply units
•
Identification (ID)
•
LAN ports
•
MGMT ports
(2)1600W AC (220V AC) redundant power supplies, hot-swappable or
(2)1100W DC (110V AC) redundant power supplies, hot-swappable